Instructions
- Step 1Park the golf cart on level ground. You want to minimize the possibility of the golf cart rolling away while you are working on it.
- Step 2Switch the golf cart off and activate the parking brake. Turning the golf cart off and setting the brake helps avoid a possible accident.
- Step 3Block the opposite side's tire with a board, brick or another obstacle. Do this to avoid the golf cart from rolling away while you are working on it.
- Step 4Position a floor jack under the golf cart frame but near the location of the flat tire.
- Step 5Use the appropriate tool to loosen the lug nuts on the flat tire in a counter clock-wise fashion. You can use ratchet wrench, socket wrench or a tire tool based on what fits the tire's lug nuts. Only loosen the lug nuts. Do not remove them yet.
- Step 6Use the floor jack to raise the golf cart. Raise the golf cart until the tire is barely off the ground.
- Step 7Remove the lug nuts and tire. Continue to loosen them until you are able to detach them completely. Remember to keep your hands and arms out from under the golf cart to avoid accidental injury.
- Step 8Place the replacement tire or fixed tire on the wheel hub.
- Step 9Attach the lug nuts. Loosely tighten the lug nuts so that they stay on the hub.
- Step 10Lower the jack until some of the golf cart's pressure rests on the tire.
- Step 11Continue to secure the lug nuts until they fit tightly.
- Step 12Disconnect the floor jack. Lower the jack until the golf cart is on the ground. As you lower the floor jack, the golf cart's weight will be on the tire instead of the jack. At this point, it is safe to remove the floor jack from under the golf cart.
- Step 13Remove the other obstacles from the other wheels.
Tips & Warnings
- If you have to leave the golf cart to have a tire fixed, lower the jack so the golf cart is resting on the ground instead of being elevated by the floor jack.
- Keep your hands and arms out from under the golf cart to avoid accidental injury.

No comments:
Post a Comment